About this Item
RARE 4X Chevy DOOR HANDLE STICKER FOR HONDA TAPE ON PVC BADGE, GREAT QUALITY
– The Best Quality in the Business –
| Item #: AM•In stock
Includes:
|
Usually ships the same business day
Important |
Vehicle Emblem and Badge Installation Instructions |
|---|---|
| Step 1 | Removing old emblem or emblems can done neatly by using a heat gun on the lowest setting. Carefully pry the old emblem off using a putty scraper. |
| Step 2 | Then clean the area where the emblem adhesive still remains. Use adhesive cleaner and a clean rag. |
| Step 3 | Most important step is to use rubbing alcohol on a different rag to clean the remaining grease or dirt from the location. Allow it to air dry. |
| Step 4 | Using a level or ruler to create a straight line parallel to the ground, marking the location of the emblem against desired surface or body lines. Use painter’s tape to make your guide lines. |
| Step 5 | Prepare the emblem, making sure it’s clean. Be sure to never touch the application adhesive on the back of the emblem after Remove the backing tape from the adhesive. |
| Step 6 | Hold the emblem just above the surface in the desired location, using the painter’s tape as a guide to keep the emblem level located properly. |
| Step 7 | Stick the emblem on and hold it in place until the adhesive has had a chance to setup bond on the surface of the vehicle. This usually takes 10 seconds.. |
